logo
AIDA FORKLIFT EQUIPMENT CO., LTD.
products
News
Home >

China AIDA FORKLIFT EQUIPMENT CO., LTD. Company News

how to change hand pallet truck to electric?

What a conversion kit typically includes:                                     Motorized Drive Unit: This is the heart of the conversion. It's a compact unit containing an electric motor, a drive wheel(s), and often a small gearbox. This unit attaches to the existing frame of your manual pallet jack. Battery Pack: Usually a rechargeable lithium-ion battery, which is smaller and lighter than traditional lead-acid batteries. Controller/Throttle Assembly: This replaces or attaches to your existing handle, allowing you to control the speed and direction (forward/reverse) of the motorized unit. It often includes an emergency stop button and battery level indicator. Mounting Hardware: Brackets and fasteners designed to secure the drive unit and handle assembly to your specific pallet jack model. Wiring Harness: Connects the battery, motor, and controller Benefits of using a conversion kit: Cost-Effective: Generally much cheaper than buying a brand new electric pallet jack. Improved Ergonomics: Reduces the physical strain of pushing and pulling heavy loads, minimizing operator fatigue and potential injuries. Increased Productivity: Speeds up material handling, especially over longer distances or with frequent movements. Maneuverability: Retains the compact footprint and good maneuverability of a manual pallet jack, making it suitable for tight spaces. Utilize Existing Equipment: Extends the life and usefulness of your current manual pallet jacks. Where to find them: You can find these conversion kits from Aida forklift Equipment Co.,ltd

2025

06/23

Regarding the solutions for the Electric power handle retrofit of manual pallet trucks

Regarding the solutions for the Electric power handle retrofit of manual pallet trucks: 1. Electric Conversion Kit Products Currently, there are mature electrification retrofit solutions in the market. For example, the eBST electric pallet truck model can convert a manual pallet truck into an electric version. This kit includes core components such as a dual-motor system, an intelligent control handle, a lithium battery, and a charger. It supports hydraulic lifting and can operate continuously for 2 hours, with a maximum load capacity of up to 2000 kg. In addition, some hybrid models (such as T20/T20i) support switching between manual and electric modes. They are equipped with brushless motors and IoT functions, facilitating operation monitoring. 2. Core Components for Retrofit Power System: Usually uses a 48V lithium battery (such as with a capacity of 15Ah or 30Ah) to provide stable power and support fast charging. Control System: Integrates electronic steering, speed regulation (up to 5.6 km/h), and safety protection features (such as overload detection and emergency braking). Mechanical Adaptation: It is necessary to ensure the compatibility of the forks of the manual pallet truck with the electric drive system. Some retrofit solutions require adjusting the fork spacing or adding adapters. 3. Advantages and Applicable Scenarios Efficiency Improvement: After electrification, the handling speed is faster (up to 5.0 km/h), reducing human fatigue and being suitable for high-frequency warehousing operations. Cost Optimization: Long-term use can reduce labor costs, and the maintenance cost of lithium batteries is lower than that of traditional lead-acid batteries. Environmentally Friendly: Zero-emission design conforms to the modern industrial trend of greening.

2025

04/12

How to choose A series and H series of forklift scales

There are significant differences between the H series and A series of forklift scales in several aspects, including accuracy, installation method, cost, applicable scenarios, etc. The following is a specific comparison of the two: Accuracy A Series: The overall accuracy is generally 1%, which belongs to the indirect weighing method and relies on the portal system to transmit cargo weight data. H Series: The overall accuracy can reach 0.1%, using a direct weighing method, which can perceive the weight of goods more directly and has higher accuracy. Installation Method A Series: By installing sensors in the forklift portal system for measurement, no modification to the forklift is required, and the installation and calibration process are relatively simple. H Series: Directly mount the weighing system on the forklift fork frame, and the installation and disassembly are very convenient, just like hanging the fork, no professional training is required for quick loading and unloading. Cost A Series: Due to its simple structure, the cost is relatively low, suitable for application scenarios with low budget and low requirements for weighing accuracy. H Series: Adopt high-quality components and processes, the overall cost is higher, but it provides higher accuracy and reliability, suitable for application scenarios with high requirements for weighing accuracy. Applicable Scenarios A Series: Suitable for non-direct trade scenarios, such as industries with low unit price of goods, harsh and complex working conditions and frequent weighing, scenes requiring overload alarm, etc. H Series: Suitable for industries with frequent weighing and high requirements for accuracy, such as logistics warehousing, foundry, discrete manufacturing, tobacco, grain and oil, chemical new materials, etc.

2025

03/13

1 2 3 4