China AIDA FORKLIFT EQUIPMENT CO., LTD. Company News

2023 Changsha International Construction Machinery Exhibition Successfully Achieved author: Amy 2023-05-17 On May 12, the third Changsha International Construction Machinery Exhibition (CICEE) was grandly opened at the Changsha International Convention and Exhibition Center. As a newly emerging world-class construction machinery exhibition, Changsha International Construction Machinery Exhibition was founded in 2019 by China Machinery Industry Federation, China Construction Machinery Society, Hunan Provincial Department of Industry and Information Technology, Hunan Provincial Department of Commerce, Hunan Provincial Council for the Promotion of International Trade and Co-organized by Changsha Municipal People's Government.On May 12, the third Changsha International Construction Machinery Exhibition (CICEE) was grandly opened at the Changsha International Convention and Exhibition Center. As a newly emerging world-class construction machinery exhibition, Changsha International Construction Machinery Exhibition was founded in 2019 by China Machinery Industry Federation, China Construction Machinery Society, Hunan Provincial Department of Industry and Information Technology, Hunan Provincial Department of Commerce, Hunan Provincial Council for the Promotion of International Trade and Co-organized by Changsha Municipal People's Government. There are 13 indoor pavilions, 8 outdoor exhibition areas, and 23 theme areas in this exhibition. 1,502 companies from all over the world participated in the exhibition. Among them, 35 of the world's top 50 construction machinery brands participated in the exhibition, with more than 20,000 exhibits and an exhibition area of 300,000. square meters.   HOT NEWS   This year's exhibition with the theme of "high-end, intelligent and green - a new generation of construction machinery" is the largest construction machinery exhibition in Asia this year, attracting more than 350,000 visitors from all over the world, and the on-site turnover of the exhibition reached 53.6 billion yuan . At this exhibition, exhibitors released more than 1,200 new products and new technologies, presenting new trends in intelligence, digitization, electrification and unmanned development. Electrification, energy saving, emission reduction, and consumption reduction have become industry benchmarks. The theme of this year's Changsha International Construction Machinery Exhibition is "Intelligent New Generation Construction Machinery", with 20 exhibition areas including crane machinery, construction machinery, road machinery, engineering special vehicles, aerial work vehicles, mining machinery, and construction machinery accessories. , another 30 international high-end forums and 100 business summits will be set up to comprehensively display new products, new technologies and new ideas in the fields of intelligent, digital, new energy, electrified and unmanned construction machinery. It is worth mentioning that the proportion of new energy equipment in this exhibition is relatively large, and the intelligent digital system focuses on displaying the new generation of information technology application scenarios such as 5G + industrial Internet, artificial intelligence, and digital twins, which will be the high-end of the global construction machinery industry. , Intelligent, and green development brings more room for imagination.   Mr. Fu Zhongxuan, Chairman of the Concrete Machinery Branch of China Construction Machinery Industry Association, Chairman of the Road and Compaction Machinery Branch, and Chairman of the Concrete Machinery Sub-Technical Committee of the Standardization Administration of China, experienced Aida smart products. Mr. Hu Yangbo, General Manager of China Forklift, and Aida Marketing General Manager had a friendly exchange on Aida's smart products.       FOREIGN TRADE EXCHANGE   The green and intelligent development of industrial vehicles has become a global consensus. Driven by scientific and technological innovation, integrating new energy, big data, artificial intelligence and other new technologies, it provides global users with full-value chain, full-scenario, one-stop intelligent logistics solutions. "Docking international economy and trade, expanding regional cooperation". During the exhibition, Aida brand and products were recommended to representatives of chambers of commerce and enterprises from Russia, Ecuador, Japan, Uzbekistan, Tajikistan and other countries.   INTERVIEW REPORT   Mr. Ming Chendong, chairman of Aida, was interviewed by Tongshang.com   Mr. Xu Chong, General Manager of Aida Marketing, was interviewed by Tongshang.com.

AIDA FORKLIFT EQUIPMENT CO.,LTD will participate in the 3rd Changsha International Construction Machinery Exhibition 2023-04-18 AIDA FORKLIFT EQUIPMENT CO.,LTD Co., Ltd. will participate in the 3rd Changsha International Construction Machinery Exhibition from May 12th to 15th, 2023. This exhibition will be held at the Changsha International Convention and Exhibition Center, and the company will showcase multiple series of products, including industrial material handling equipment, industrial intelligent weighing equipment, and flexible intelligent handling platforms. AIDA FORKLIFT EQUIPMENT CO.,LTD focuses on the research and development and manufacturing of industrial handling and intelligent equipment. The company has strong technological accumulation and rich industry experience, and all products adopt independent intellectual property rights, reaching the international advanced level. In 2019, AIDA FORKLIFT EQUIPMENT CO.,LTD was awarded the title of "High tech Enterprise in Hunan Province". In the fiscal year 2021, the company achieved a revenue of 650 million yuan, a year-on-year increase of 13.8%. The company's products sell well throughout the country, and some of them are also exported to overseas markets such as Southeast Asia and the European Union, earning widespread praise. At this exhibition, AIDA FORKLIFT EQUIPMENT CO.,LTD will further promote solutions such as intelligent factory logistics systems and flexible automated production lines, expand its influence and expand its industry influence. The Changsha International Construction Machinery Exhibition is a widely influential industry event, and the participation of AIDA FORKLIFT EQUIPMENT CO.,LTD will further enhance the company's visibility and reputation, and explore a broader market space. In the future, the company will continue to increase research and development investment, launch more high-end and green environmental protection products, create greater value for customers, and contribute to the harmonious development of society.  

Aida held an offline press conference at 3:30 pm on September 29, 2022. Purpose of the activity: New product release, highlighting the material handling brand, simplify material handling. Before the start of the event, the chairman of the board, Mr. Ming, came to the event site to motivate the employees and affirmed the event. At the beginning of the event, the guests first checked in at the sign-in office, and then signed on the signature wall and took a photo. Then they went to the product experience area to learn more about Aida products, and operate trucks by themselves to experience the product performance. ​​​​​In addition, we also prepared two warm-up mini-games for the guests to participate in to operate the pallet truck and stacker truck, a beautiful gift rewarded after passing the game. At this conference, we unveiled a number of electric pallet trucks that can load 2 tons of products, including all-electric off-road pallet trucks, walking-type all-electric pallet trucks, walking-type semi-electric pallet trucks, and stand-on all-electric pallet trucks; In addition, there are also 1.5-ton walking all-electric stackers, electric forklifts and intelligent electric heavy-duty truck. The diverse product models brought visual impact to the guests and enriched the content of the conference. When the invited guests basically arrived at the event site, the staff led the guests to the hall, and Mr. Xu gave a speech to sharing electrification and intelligence trend and new product debut. In logistics, manufacturing, warehousing and other industries, forklifts are called "the main force of material handling" by industry insiders, which can effectively alleviate the rising pressure on labor, site, and environment costs faced by enterprises. Forklift is an industrial handling vehicle, which is mainly used for loading and unloading, stacking and short distances of palletized goods. Transportation operations are often used for the transportation of large-scale objects, such as: stations, ports, airports, industries, warehouses, etc. With the continuous and rapid development of new energy, express delivery, medicine and other industries, the demand for electric forklifts will continue to grow, and the proportion of forklift sales will continue to increase. With the demand of emerging industries, the increase in the proportion of electric forklifts is a major trend. The development speed of electric storage vehicles in China is far behind that of internal combustion forklifts. In recent years, with the implementation of the national energy-saving and emission-reduction policy, people pay more and more attention to green environmental protection, energy-saving and emission reduction, and the requirements for land intensification are getting higher and higher. Therefore, electric storage vehicles that do not pollute the environment have been widely used worldwide. use. After the speech, a technician led the guests to visit the production workshop and operated the truck on site. In the production workshop, we have a batch of semi-finished and finished trucks, and the guests can intuitively feel the quality of our products. After the visit, the staff led everyone to the front hall and took a group photo together. Finally, all the guests had dinner party together and the event ended successfully. The Aida team shared the event live, welcome to view the replay.  

How can you choose an electric truck that is suitable for you own use and at the same time cost-effective? author: Amy 2022-09-05 How can you choose an electric truck that is suitable for you own use and at the same time cost-effective? It is nothing more than the following factors. Let me share with you the issues that need to be paid attention to in the process of purchasing electric trucks: 1. The thickness of the steel plate material of the fork. Generally, the 3.0-ton manual pallet truck with a better standard uses a steel plate with a thickness of 4mm, while the thickness of the steel plate and the paint thickness are less than 4mm, or only 3.5mm. Some of them can only reach 3mm, which is the standard of 2 tons of manual trucks. Therefore, friends who purchase must pay attention to this matter to prevent the manufacturer from cutting corners in exchange for the price advantage, which is also very irresponsible to consumers. Such a truck is also very prone to failure in subsequent use. And there will be problems in the after-sales service in the future. 2. Load tonnage, generally speaking, the national standard manual pallet truck has 4 kinds of load capacity of 2.0t-2.5t-3.0t-5.0t. However, according to the subdivision of market demand, the manual hydraulic trucks manufactured by some manufacturers also have 6 types of load capacity: 1.5T, 2.0T, 2.5T, 3.0T, 4.0T, and 5.0T, which gives the market more choices. It also covers the operation requirements of low, medium and high tonnage, and customers can solve their own use problems according to their actual needs. 3. The first choice is to start from the low height of the hydraulic truck. The height of the pallet in the national standard is generally raised to 185mm, and the manufacturers of the national standard manual hydraulic truck have also achieved the low and low height. Generally, when the hydraulic truck is placed at the low point, the height is 85mm and 75mm. The height of the fork of the manual hydraulic truck from the ground can reach 51mm, and some even 35mm, which is a special requirement. Low-release manual hydraulic truck: low cost, relatively low cost, high efficiency, fast automatic lifting, easy operation, etc. It is widely used in supermarkets, workshops, airports, logistics warehouses, warehouses, etc. . 4. Wheel material configuration. Generally, the wheel material can be divided into polyurethane and nylon. This needs to be selected according to the different selection of the site. The ground is better, and the ground is relatively smooth, you can use polyurethane wheels to pull and save labor. If the ground is not very good, and it is cement or asphalt road, or even worse road conditions, then choose nylon wheels, one is light to pull up, and two, the rotation is flexible and has a certain degree of wear resistance. Besides, the general hydraulic car is not the above two wheel materials. There are other configuration materials, such as polyurethane wrapped nylon, aluminum alloy wrapped plastic, bakelite wheels and so on. 5. Secondly, check how much the width of the fork of the truck is appropriate. The key judgment is to see the size of the pallet you use. Under normal circumstances, the standard sizes of manual hydraulic trucks are divided into two types: one, wide truck 680*1220; two, narrow truck 550*1150, which kind of truck is suitable for you, depends on the size of the existing pallet used to decide.

  Aida will attend BAUMA CHINA 2022 author: Drew 2022-08-30 Aida will attend BAUMA CHINA 2022 during November 22–25 in Shanghai of China. Booth Number:to be unveiled soon Warmly invite to visit our booth and  have a face-to-face conversation. bauma CHINA (Shanghai BMW Construction Machinery Exhibition), namely Shanghai International Construction Machinery, Building Materials Machinery, Mining Machinery, Construction Vehicles and Equipment Expo, is held every two years at Shanghai New International Expo Center, providing professional exchanges for people in the construction machinery industry display platform. As an extension of Bauma Germany in China, the Shanghai Bauma Machinery Exhibition has become an important business platform for gathering global leaders in the construction machinery industry, displaying new product technologies, and gaining insight into the development trend of the industry since it joined the WTO in China in 2002. Actively Promote the upgrading of China's manufacturing industry to high-end, high-efficiency and high-quality. Shanghai BMW Machinery Exhibition will be held at Shanghai New International Expo Center from November 22 to 25, 2022. The exhibition will bring together industry leaders at home and abroad, covering construction machinery, mining raw material extraction and processing equipment, building materials machinery, accessories and service providers to showcase the innovation and development of the industry. At that time, it will attract professional visitors from engineering companies, construction companies, contractors, building materials production companies, mining companies, leasing companies, water conservancy and hydropower, agricultural machinery dealers, municipal gardens, airport groups, logistics companies, ports, trading companies and other fields. Even under the haze of the epidemic, the last exhibition attracted a total of 1 million online and offline audiences by opening up an innovative model of both online and offline. The successful holding of the exhibition has brought surging new impetus to the world's construction machinery, conveying the firm confidence and hope of "planning for a win-win situation, and everyone's success" to the whole industry, and also for the construction machinery with strong resilience under the anti-epidemic resumption of work and full production and high output. The industry provides a world stage for inspection and demonstration. Below I have compiled some frequently asked questions from visitors to the exhibition. 1. When will the Shanghai Bauma Exhibition Construction Machinery be launched? 22-24 November 2022, 09:00–17:00 25 November 2022, 09:00–15:00 2. Where is the Shanghai BMW Machinery Exhibition? Shanghai BMW Construction Machinery Exhibition was held in Shanghai New International Expo Center. Address: No. 2345, Longyang Road, Pudong New Area, Shanghai, China, Postal Code: 201204. 3. Is there a fee for visiting? Complete the online pre-registration visit to save 50 yuan tickets to visit the exhibition for free. 4.who can come and visit. The exhibition is for industry professionals, and all friends who are interested in construction machinery are welcome to participate. 5. Is there a parking lot near the exhibition hall? The Shanghai New International Expo Center has a parking lot with a capacity of 4,730 parking spaces. Parking fee: 8 yuan per hour, capped at 64 yuan per day, this rate applies to cars or other light vehicles. Since there are dedicated parking spaces around the exhibition hall, and the exhibition period is very crowded, it is recommended for friends who come to the exhibition hall by car to park their cars in the parking spaces along Metro Line 2. There are parking spaces at Science and Technology Museum Station and Century Park Station of Metro Line 2. You can park your car in the above parking lot, and then walk to the exhibition hall at Longyang Road Station.     PreviousBack to listNext

  Aida attended the 23th Intelligent Manufacturing Equipment Expo author: Amy 2022-08-30 The 23rd Changsha Intelligent Manufacturing Equipment Expo is a highly influential machinery industry exhibition in Hunan and central China,focusing on products and solutions of intelligent warehousing and logistics, industrial automation, industrial robots, energy saving and environmental protection. "Energy-saving, pro-environment, efficiency and intelligence" is the design concept of AIDA material handling equipments. Aida team discussed with experts and peers about the new trend of intelligent manufacturing, enabling the new development of the industry. Changsha Intelligent Manufacturing Equipment Expo (referred to as "Changsha Smart Expo") was founded in 2000. After 22 years of careful cultivation, it has become a highly influential machinery industry exhibition in Hunan and central China. Changsha Smart Expo is committed to serving the industrial manufacturing industry in central China. It is an ideal trading platform for intelligent manufacturing equipment and industrial manufacturing equipment to conduct industry exchanges, promote brands, expand business, and sell products. It has built a platform for business cooperation with world-renowned enterprises for production and operation enterprises in central China, and has played a positive role in promoting the high-quality development of manufacturing in China and the world. Hunan Province's equipment manufacturing industry is strong, especially in the fields of construction machinery, rail transit equipment, aerospace, automobiles and parts, advanced equipment manufacturing, new materials, electronic information and other manufacturing industries, with obvious competitive advantages. The theme of this exhibition is "wisdom" Huixiaoxiang, leading the industry. The intelligent casting exhibition area will focus on displaying high-quality castings, casting equipment, casting quality testing equipment, casting materials, casting molds, casting tooling, fixtures, and automation equipment in the foundry industry. and peripheral equipment, environmental protection equipment, cleaner production and waste disposal, safe operation and environment, foundry technology, computer applications, special robots for foundry, etc., the display content also radiates machine tools, auto parts, construction machinery, agricultural machinery, general machinery, internal combustion engines, rails Transportation and other upstream and downstream industries. The 2023 Changsha Smart Expo will be held at Changsha International Convention and Exhibition Center from April 21 to 23, 2023, with an estimated exhibition area of 50,000 square meters, focusing on CNC machine tools, laser sheet metal equipment, mold manufacturing, industrial automation, industrial robots, welding, surface Processing, electroplating and coating, intelligent warehousing and logistics, foundry, industrial cleaning, energy saving and environmental protection, hardware and electromechanical products and solutions, industry experts will be invited to discuss the new trend of intelligent manufacturing and empower the new development of the industry. Participating in the Changsha Smart Expo will be of great significance to establishing a corporate image, expanding the market, and expanding the influence of products. Member units of Hunan Foundry Industry Association and mold-related enterprises attach great importance to them, actively participate, and actively register for exhibitions, trade and exchange activities. They will bring high-quality products suitable for market demand, fully display themselves, and promote the prosperity and development of enterprises and industries. In order to improve the level of the foundry technology industry and promote the development of the intelligent foundry industry, so as to realize the comprehensive upgrading of related industries and the overall improvement of the quality of economic development, and promote the development of the foundry industry in Hunan Province to a more intelligent and high-end direction. Wish to meet you at the next CCEME.

  What are the benefits of electric trucks? author: Amy 2022-08-17      Electric trucks are often used in stations, docks, airports, warehouses, construction sites, freight yards and other places. The trucks are also called industrial vehicles. They are trackless vehicles for enterprises to carry, load, unload and stack goods over short distances. Among them, electric forklifts are also divided into three types: electric trucks, electric pallet trucks and electric stacking trucks, and then we will talk about their respective advantages of these three trucks.The advantages of using electric trucks can be summarized as follows:       1. The cost of direct handling by electric trucks can be reduced by more than 25% compared with manual handling, which reduces the labor intensity of the movers and improves the labor conditions of enterprises;       2. The drive system of the electric pallet truck is perfect, the electric pallet truck responds quickly, the control is precise, and the operation is stable;       3. The electric truck increases the cargo unit handled, which greatly saves the handling time;       4. The electric truck reduces the damage of the goods being carried and improves the success rate of the product;       5. The electric truck increases the height of the stacking goods and improves the utilization rate of the stacking space;       6. The electric truck system is efficiently integrated, all wires and cables have reliable fixed protection, and the failure rate is significantly reduced;       7. The electric truck has good maneuverability and diversified work performance, reduces the use of other loading and unloading equipment, and reduces the cost of the entire handling facility;       8. The operation of the electric pallet truck is flexible and safe. When in danger, press the emergency stop button directly to cut off all the power supply, and the electric pallet truck will stop immediately;       9. The electric stacker is easy to operate, powerful and safe to use, which can save the cost of cargo stacking space;       10.The operation of electric stacker trucks is more precise than human and avoids unnecessary dangers;       11.Electric stacker trucks have high efficiency and reduce time costs.       12.The electric pallet truck increases the stacking height and improves the utilization of stacking space.              The principle of lifting and lowering the goods of the all-electric pallet truck is the same as that of the semi-electric pallet truck. The difference is that all operations of the all-electric pallet truck use an electronic control system without manual operation.       Trucks are widely used in logistics, warehouses, shopping malls, workshops, schools, airports, etc. Starting from the handle, the truck is designed with ergonomic handles to meet the load requirements of 1-5 tons. The fork design combines European and American pallet standards. Casters such as polyurethane, nylon, and rubber are used to meet the requirements of handling tools in various environments. The beetle design of the fork reduces wear and tear on the handling tools during loading and unloading.             The above are the advantages of electric trucks. With the rapid development of the logistics industry, it will be more widely used in the future.