How can you choose an electric truck that is suitable for you own use and at the same time cost-effective?
author: Amy
2022-09-05
How can you choose an electric truck that is suitable for you own use and at the same time cost-effective?
It is nothing more than the following factors. Let me share with you the issues that need to be paid attention to in the process of purchasing electric trucks:
1. The thickness of the steel plate material of the fork. Generally, the 3.0-ton manual pallet truck with a better standard uses a steel plate with a thickness of 4mm, while the thickness of the steel plate and the paint thickness are less than 4mm, or only 3.5mm. Some of them can only reach 3mm, which is the standard of 2 tons of manual trucks. Therefore, friends who purchase must pay attention to this matter to prevent the manufacturer from cutting corners in exchange for the price advantage, which is also very irresponsible to consumers. Such a truck is also very prone to failure in subsequent use. And there will be problems in the after-sales service in the future.
2. Load tonnage, generally speaking, the national standard manual pallet truck has 4 kinds of load capacity of 2.0t-2.5t-3.0t-5.0t. However, according to the subdivision of market demand, the manual hydraulic trucks manufactured by some manufacturers also have 6 types of load capacity: 1.5T, 2.0T, 2.5T, 3.0T, 4.0T, and 5.0T, which gives the market more choices. It also covers the operation requirements of low, medium and high tonnage, and customers can solve their own use problems according to their actual needs.
3. The first choice is to start from the low height of the hydraulic truck. The height of the pallet in the national standard is generally raised to 185mm, and the manufacturers of the national standard manual hydraulic truck have also achieved the low and low height. Generally, when the hydraulic truck is placed at the low point, the height is 85mm and 75mm. The height of the fork of the manual hydraulic truck from the ground can reach 51mm, and some even 35mm, which is a special requirement. Low-release manual hydraulic truck: low cost, relatively low cost, high efficiency, fast automatic lifting, easy operation, etc. It is widely used in supermarkets, workshops, airports, logistics warehouses, warehouses, etc. .
4. Wheel material configuration. Generally, the wheel material can be divided into polyurethane and nylon. This needs to be selected according to the different selection of the site. The ground is better, and the ground is relatively smooth, you can use polyurethane wheels to pull and save labor. If the ground is not very good, and it is cement or asphalt road, or even worse road conditions, then choose nylon wheels, one is light to pull up, and two, the rotation is flexible and has a certain degree of wear resistance. Besides, the general hydraulic car is not the above two wheel materials. There are other configuration materials, such as polyurethane wrapped nylon, aluminum alloy wrapped plastic, bakelite wheels and so on.
5. Secondly, check how much the width of the fork of the truck is appropriate. The key judgment is to see the size of the pallet you use. Under normal circumstances, the standard sizes of manual hydraulic trucks are divided into two types: one, wide truck 680*1220; two, narrow truck 550*1150, which kind of truck is suitable for you, depends on the size of the existing pallet used to decide.
